Dating Wwii Helmets

Today, our commitment to WW2 German helmets which are the best-of-their-type, and fresh-to-the-market, is recognised both nationally and globally; as a result, the German helmets we offer for sale, readily find new homes, and achieve great prices. Soldiers of Fortune supplies historically accurate replica clothing and equipment from WW1, WW2 and the Vietnam conflict, with the largest collection of replica uniforms and equipment in the world. In researching a German WWII helmet, collectors examine all aspects of the helmet–even using a jewelers loupe or a microscope. The helmet is painted white and has its original Stencilled navy blue paint lettering ‘POLICE’ and twin decal police inspectors silver rank pips. Manufactured by the the Empire Rubber Company, and used in the early s before the introduction of the steel-shelled Armored troops helmet. Click to open image! No matter the country, the contents of WW2 rations were similar, including some kind of crackers or biscuits, sweets or chocolates, and cigarettes. Many items USA made!

Dating the M1 Steel Helmet

Except for a raid on St. Albans during the s, which has the claim to fame of being the northern most battle of the Civil War, there have not been any battles fought on Vermont soil since the age of photography which begins just prior to the Civil War. However, it may be possible to find men in military uniform in an historic Vermont photo. Drills, victory parades, final goodbyes and welcome backs from war, and bridge and dam projects are a few of the events that have been captured on film.

Following is a brief discussion on the evolution of military uniforms.

After World War II, helmet research and development continued in two tests that were conducted; however, the concept to date had not been.

Updated: Aug Your WWII collection is not complete without an M1 helmet and with roughly twenty-two million made during the war, acquiring one is a very achievable task; you only need to know what to look for. The following guide is not meant to be conclusive; there have been numerous books published on the topic of WWII helmets and none have completely archived the changes the M1 helmet experienced throughout the war. Louis, Missouri. McCord began production in June and by the end of the war it had produced twenty million M1 helmets.

Starting in January , Schlueter began producing its two million helmets. These two producers can be distinguished by multiple features. Firstly, the shape, McCord helmets have a higher top and a slight ‘dip’ towards the front of their brims, whereas Schlueters appear stouter and maintain a somewhat constant angle from the side of the helmet to the front.

Both manufacturers’ helmets left the factory with olive drab paint, cork texture, and bartacked web chinstraps. When possible, try to acquire helmets that are still in this wartime configuration. Two other methods of differentiating a McCord manufactured helmet from a Schlueter can be viewed from the same perspective.

Dating American Helmets – Dating the M1 Steel Helmet

From to late , the seam met in the front center edge of the steel helmet. The rim was made of stainless steel which did not rust but shined excessively when exposed, as the paint normally did not hold up well under constant contact with hard surfaces. At that time, the seam moved degrees to the center rear edge of the helmet. Originally, the chin straps were sewn onto fixed loops.

The M1 helmet is a combat helmet that was used by the United States’ military from World War II until , when it was succeeded by the PASGT helmet. “​Dating the M1 Steel Helmet”. Retrieved

About Us Email Us. There is a large variety of helmet shapes and designs. This fact has helped propelled the field of collecting helmets. While the hobby has growing popularity the value of the items has increased. This section of the website provides a pictorial guide to the various helmets that were used by countries during the periods of WWI through today. This is also an identification and price guide for collectible helmets around the world.

From all the braches.

NEW WWII Style BLACK German Motorcycle Half Helmet Chopper Biker Pilot Goggles

Free shipping for many products!. See the seller’s listing for full details. Our wide selection is elegible for free shipping and free returns, Our wide selection is elegible for free shipping and free returns. Everything Cifial is comes from their constant need to innovate – in the product line and in the conception and production technologies, Skechers is an award-winning global leader in the lifestyle footwear industry that designs, Item model number: QPMY-OPAL-4k, A good choice of your versatile flashlight, Occasion: Making it perfect for outdoor or indoor activities including cycling.

Also identified as Doughboy helmet. The M saw action in WWI and the early days of WWII. Between the years of and , US companies were.

Datingin order to ease production and save brass, a new blackened steel stamped dating was approved along with a steel liners cap. Late saw the wwii of brass in the helmet in metal hardware. Helmets was the last WWII specification regarding the chin strap assembly. This piece is located wwii the left chin strap and is used in conjunction with dating buckle on the right side to secure the chin strap assembly under the wearers chin. The hook underwent helmets same material and finish changes as the buckle and securing cap ww2 the same time.

Byhelmet helmets had been adopted which changed how the WW21 helmet was produced. Wwii the early s, a fine sand aggregate was applied to new helmets refurbished helmet M1 helmets shells. Lot the exterior of the helmet feels like fine sand it is not a WWII helmet.

Dating us m1 helmet

Later production of M40 and M42 helmets have the factory code stamped on the inside rear skirt above the lot number stamp. Early rivets were made of brass with zinc coating and subsequently changed to steel rivets with zinc coating. Early production rivets can also be found in aluminum but only in small numbers. The manufacturer code is stamped on the inner rim on the left side close to the chinstrap bale.

The number “62” indicates the shell size. The change in manufacturer code from ET to ckl occurred during final production of the M40 and initial production of the M42 models.

Can they effectively date a helmet? When were they stamped into the helmet? At the foundry or pressing plant? Is there a way to break the code?

The soldier on the right wears a helmet with a late model helmet net and elastic foliage band while the helmet on the soldier on the left exhibits common paint loss to the helmet rim. Few questions evoke so many opinions as this one often asked at shows, auctions, or online forums. Sometimes, the people answering the question seem to try outdo others by over-complicating an already complicated evaluation. In order to accurately deduce if a M1 helmet and liner are of WWII origin , it is important to know the basic manufacturing characteristics of the helmet and liner.

Over time, many new specification changes emerged.. The collector should take note that as new specifications came into being, older patterns were normally used up, in conjunction with the production of new specification models of any part of the helmet. Approximating dates according to stamps in WWII helmets cannot always be done as some are unreadable. So, it is normal for odd combinations such as a fiber liner with a herringbone suspension. This can result in many interesting combinations, both historically and informatively.

This article will provide the new collector with a step-by-step process to determine the WWII vintage of the M1 helmet.

ORIGINAL WWII HELMETS FOR SALE

Maybe it is the sheer number of helmets I’ve had pass through my hands, but I don’t place a great amount of importance on these codes. Nevertheless I began to notice this trend in the helmet community of cataloging heat numbers. Using them to date a helmet. Using them to discredit a helmet.

Is an M1 helmet and liner of WWII origin? and parts dating from the first approved production models in to the last WWII specifications in.

By Grant G. I am pinning it as a reference but, all should be aware that it is not a perfect chart. Scott Bugme. Schlueter produced 2,, steel shells during WWII and I feel as though I have looked at every single one the past few days. Below, in the attached images, are my findings regarding Schlueter produced helmets, their lot numbers, loop variation, seam placement, rim construction, and chinstrap configuration.

I have filled in with red text the common dates attributed to characteristic changes such as, the transition from front to rear seam, fixed loops to swivel loops, etc. As for lot A, this lot precedes December due to its participation in a metallurgical examination that took place at that time. This chart is by no means set in stone; it is definitely possible that their are helmets out there that would alter transition dates, however I can assure you that the helmets below were included with much scrutiny.

If a configuration seemed suspect, I would not add it without seeing photos. If I was unable to tell whether the straps were OD 3 or just really faded OD 7 it didn’t get included.

HISTORY OF THE GERMAN HELMET

Helmets are as old as war itself, and were some of the very first forms of protective equipment for those engaged in warfare. As warfare and weapons evolved, so did the helmets used to protect against them. Helmets made from leather, evolved into brass, bronze, steel and then to the complex modern fibers of today. We will be looking at each major period and discussing the evolution, protection offered, and comparisons to those helmets before and after.

On the inside there was a strong lining on interwoven straps, onto which a felt cap had been sewn in. The outside was cleverly adorned all around with rows of white tusks from a shiny-toothed boar, the tusks running in alternate directions in each row.

Note the rounded helmets on the right and the wide-brimmed hats on the left. WWI Uniforms: Image courtesy of Philip Katcher. A variety of uniforms are displayed.

The MA1 helmet, adopted in , differed only in minor details. In , the M-1 “steel pot” helmet was adopted as a replacement in all the US armed services, although it did not become universal for at least another year. The new helmet was issued to the Marine Corps in the spring and early summer of At Guadalcanal , in August , the M1 helmet was common and the old “dishpan” helmet had mostly disappeared. After its adoption in , the M-1 Steel Helmet became the symbol of U. A steel helmet is designed to protect the user from flying fragments of exploded ordnance.

US Helmets and Covers from WW2 to Present Day